Digital forensic imaging for law enforcement and corporate investigations The increasing diversity, size and sophistication…
TDP Protocol Modules
Add SAS and USB imaging with TD1 and TD2
Tableau Protocol Modules extend the imaging capabilities of the TD1 Forensic Duplicator and TD2 Forensic 1:2 Duplicator to SAS and USB storage devices. Tableau builds two separate protocol modules to meet the needs of forensic examiners: TDP6 (SAS) and TDP8 (USB).
Built for high-performance and ease-of-use in write-blocked forensic imaging applications, each module attaches to the SATA input with a single SATA unified power and signal cable (TC4-8). Device power is supplied by the duplicator–no separate power supply is required.
Protocol modules are available for purchase individually or bundled as a value-priced two pack. Contact Guidance Software or your Authorized Tableau reseller for more details.
TDP6 Specifications
| Product | Tableau SAS Duplicator Protocol Module |
| Model TDP6 | |
| Connectors: Duplicator Interface (right side) | |
| SATA | One unitized SATA connector |
| Connectors: Subject Device Interface (left side) | |
| SAS | SAS Signal Connector |
| DC Output | 4-pin male «drive power» connector (power to SAS hard disk) |
| Other Features | |
| Write-Blocking | Write-blocking is permanently enabled in the Tableau Duplicator Protocol Modules |
| Status LEDs | 4 LEDs: Power ON, subject device detected, duplicator detected, drive activity |
| Compatibility | |
| SAS Devices | SAS hard disks |
| Duplicator Interface | Currently only Tableau Duplicator Model TD1 |
| Physical / Environmental | |
| Power | 8.2 watts typical operating (not including hard disk) |
| Supply voltage (DC IN) | +5VDC @ .5A, +12VDC @ 2.5A (includes budget for hard disk) |
| Output voltage (DC OUT) | +5VDC @ 1.5A, +12VDC @ 1.5A |
| Dimensions | 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H) |
| Weight | 5.6oz (166g) |
| Operating temperature range | 0 to 55 degrees C (no airflow) |
| Storage temperature range | -40 to 70 degrees C |
| Relative humidity | Up to 90% (non-condensing) |
| Warranty | One years parts and workmanship from date of purchase |
TDP8 Specifications
| ProductTableau USB Duplicator Protocol Module | |
| Model TDP8 | |
| Connectors: Duplicator Interface (right side) | |
| SATA | One unitized SATA connector |
| Connectors: Subject Device Interface (left side) | |
| USB | One USB A (4 pin, USB 2.0 high/full/low speed) |
| Other Features | |
| Write-Blocking | Write-blocking is permanently enabled in the Tableau Duplicator Protocol Modules |
| Status LEDs | 4 LEDs: Power ON, subject device detected, duplicator detected, drive activity |
| Compatibility | |
| USB Devices | USB devices must conform to the USB Mass Storage Class Specification and more particularly must implement the Bulk Only Interface Protocol |
| Duplicator Interface | Currently only Tableau Duplicator Model TD1 |
| Physical / Environmental | |
| Power | 5.5 watts typical operating (not including hard disk) |
| Supply voltage (DC IN) | +5VDC @ 1A, +12VDC @ 1A (includes budget for hard disk) |
| Output voltage (DC OUT) | +5VDC @ 1.5A |
| Dimensions | 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H) |
| Weight | 4oz (118g) |
| Operating temperature range | 0 to 55 degrees C (no airflow) |
| Storage temperature range | -40 to 70 degrees C |
| Relative humidity | Up to 90% (non-condensing) |
| Warranty | One years parts and workmanship from date of purchase |
Entradas relacionadas
