Skip to content
TDP6

TDP Protocol Modules

Add SAS and  USB imaging with TD1 and TD2

Tableau Protocol Modules extend the imaging capabilities of the TD1 Forensic Duplicator and TD2 Forensic 1:2 Duplicator to SAS and USB storage devices. Tableau builds two separate protocol modules to meet the needs of forensic examiners: TDP6 (SAS) and TDP8 (USB).

Built for high-performance and ease-of-use in write-blocked forensic imaging applications, each module attaches to the SATA input with a single SATA unified power and signal cable (TC4-8). Device power is supplied by the duplicator–no separate power supply is required.

Protocol modules are available for purchase individually or bundled as a value-priced two pack. Contact Guidance Software or your Authorized Tableau reseller for more details.

TDP6 Specifications

Product Tableau SAS Duplicator Protocol Module
Model TDP6
Connectors: Duplicator Interface (right side)
SATA One unitized SATA connector
Connectors: Subject Device Interface (left side)
SAS SAS Signal Connector
DC Output 4-pin male «drive power» connector (power to SAS hard disk)
Other Features
Write-Blocking Write-blocking is permanently enabled in the Tableau Duplicator Protocol Modules
Status LEDs 4 LEDs: Power ON, subject device detected, duplicator detected, drive activity
Compatibility
SAS Devices SAS hard disks
Duplicator Interface Currently only Tableau Duplicator Model TD1
Physical / Environmental
Power 8.2 watts typical operating (not including hard disk)
Supply voltage (DC IN) +5VDC @ .5A, +12VDC @ 2.5A (includes budget for hard disk)
Output voltage (DC OUT) +5VDC @ 1.5A, +12VDC @ 1.5A
Dimensions 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
Weight 5.6oz (166g)
Operating temperature range 0 to 55 degrees C (no airflow)
Storage temperature range -40 to 70 degrees C
Relative humidity Up to 90% (non-condensing)
Warranty One years parts and workmanship from date of purchase

TDP8 Specifications

ProductTableau USB Duplicator Protocol Module
Model TDP8
Connectors: Duplicator Interface (right side)
SATA One unitized SATA connector
Connectors: Subject Device Interface (left side)
USB One USB A (4 pin, USB 2.0 high/full/low speed)
Other Features
Write-Blocking Write-blocking is permanently enabled in the Tableau Duplicator Protocol Modules
Status LEDs 4 LEDs: Power ON, subject device detected, duplicator detected, drive activity
Compatibility
USB Devices USB devices must conform to the USB Mass Storage Class Specification and more particularly must implement the Bulk Only Interface Protocol
Duplicator Interface Currently only Tableau Duplicator Model TD1
Physical / Environmental
Power 5.5 watts typical operating (not including hard disk)
Supply voltage (DC IN) +5VDC @ 1A, +12VDC @ 1A (includes budget for hard disk)
Output voltage (DC OUT) +5VDC @ 1.5A
Dimensions 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
Weight 4oz (118g)
Operating temperature range 0 to 55 degrees C (no airflow)
Storage temperature range -40 to 70 degrees C
Relative humidity Up to 90% (non-condensing)
Warranty One years parts and workmanship from date of purchase
Volver arriba